9.2.1_enable_cracklib.sh 9.2.2_enable_lockout_failed_password.sh 9.2.3_limit_password_reuse.sh 9.3.10_disable_sshd_setenv.sh 9.3.11_sshd_ciphers.sh 9.3.12_sshd_idle_timeout.sh 9.3.13_sshd_limit_access.sh 9.3.14_ssh_banner.sh 9.3.2_sshd_loglevel.sh 9.3.1_sshd_protocol.sh 9.3.3_sshd_conf_perm_ownership.sh 9.3.4_disable_x11_forwarding.sh 9.3.5_sshd_maxauthtries.sh 9.3.6_enable_sshd_ignorerhosts.sh 9.3.7_disable_sshd_hostbasedauthentication.sh 9.3.8_disable_root_login.sh 9.3.9_disable_sshd_permitemptypasswords.sh

bin/hardening/9.1.7_cron_d_perm_ownership.sh

@@ -6,7 +6,7 @@
 #
 
 #
-# 9.1.2 Set User/Group Owner and Permission on /etc/crontab (Scored)
+# 9.1.7 Set User/Group Owner and Permission on /etc/cron.d (Scored)
 #
 
 set -e # One error, it's over

bin/hardening/9.2.1_enable_cracklib.sh

@@ -0,0 +1,70 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.2.1 Set Password Creation Requirement Parameters Using pam_cracklib (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='libpam-cracklib'
+PATTERN='^password.*pam_cracklib.so'
+FILE='/etc/pam.d/common-password'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        does_pattern_exists_in_file $FILE $PATTERN
+        if [ $FNRET = 0 ]; then
+            ok "$PATTERN is present in $FILE"
+        else
+            crit "$PATTERN is not present in $FILE"
+        fi
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    does_pattern_exists_in_file $FILE $PATTERN
+    if [ $FNRET = 0 ]; then
+        ok "$PATTERN is present in $FILE"
+    else
+        crit "$PATTERN is not present in $FILE"
+        add_line_file_before_pattern $FILE "password    requisite           pam_cracklib.so retry=3 minlen=8 difok=3" "# pam-auth-update(8) for details."
+    fi 
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.2.2_enable_lockout_failed_password.sh

@@ -0,0 +1,70 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.2.2 Set Lockout for Failed Password Attempts (Not Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='libpam-modules-bin'
+PATTERN='^auth[[:space:]]*required[[:space:]]*pam_tally[2]?.so'
+FILE='/etc/pam.d/login'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        does_pattern_exists_in_file $FILE $PATTERN
+        if [ $FNRET = 0 ]; then
+            ok "$PATTERN is present in $FILE"
+        else
+            crit "$PATTERN is not present in $FILE"
+        fi
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    does_pattern_exists_in_file $FILE $PATTERN
+    if [ $FNRET = 0 ]; then
+        ok "$PATTERN is present in $FILE"
+    else
+        crit "$PATTERN is not present in $FILE"
+        add_line_file_before_pattern $FILE "auth    required    pam_tally.so onerr=fail deny=6 unlock_time=1800" "# Uncomment and edit \/etc\/security\/time.conf if you need to set"
+    fi 
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.2.3_limit_password_reuse.sh

@@ -0,0 +1,70 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.2.3 Limit Password Reuse (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='libpam-modules'
+PATTERN='^password.*remember'
+FILE='/etc/pam.d/common-password'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        does_pattern_exists_in_file $FILE $PATTERN
+        if [ $FNRET = 0 ]; then
+            ok "$PATTERN is present in $FILE"
+        else
+            crit "$PATTERN is not present in $FILE"
+        fi
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    does_pattern_exists_in_file $FILE $PATTERN
+    if [ $FNRET = 0 ]; then
+        ok "$PATTERN is present in $FILE"
+    else
+        warn "$PATTERN is not present in $FILE"
+        add_line_file_before_pattern $FILE "password [success=1 default=ignore] pam_unix.so obscure sha512 remember=5" "# pam-auth-update(8) for details."
+    fi 
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.10_disable_sshd_setenv.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.10 Do Not Allow Users to Set Environment Options (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+OPTIONS='PermitUserEnvironment=no'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.11_sshd_ciphers.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.11 Use Only Approved Cipher in Counter Mode (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+OPTIONS='Ciphers=aes128-ctr,aes192-ctr,aes256-ctr'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.12_sshd_idle_timeout.sh

@@ -0,0 +1,90 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.12 Set Idle Timeout Interval for User Login (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    OPTIONS="ClientAliveInterval=$SSHD_TIMEOUT ClientAliveCountMax=0"
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    if [ -z $SSHD_TIMEOUT ]; then
+        crit "SSHD_TIMEOUT is not set, please edit configuration file"
+        exit 128
+    fi
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.13_sshd_limit_access.sh

@@ -0,0 +1,104 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.13 Limit Access via SSH (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    OPTIONS="AllowUsers='$ALLOWED_USERS' AllowGroups='$ALLOWED_GROUPS' DenyUsers='$DENIED_USERS' DenyGroups='$DENIED_GROUPS'"
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            SSH_VALUE=$(sed "s/'//g" <<< $SSH_VALUE)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            SSH_VALUE=$(sed "s/'//g" <<< $SSH_VALUE)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    if [ -z $ALLOWED_USERS ]; then
+        info "ALLOWED_USERS is not set, defaults to wildcard"
+        ALLOWED_USERS="*"
+    fi
+    if [ -z $ALLOWED_GROUPS ]; then
+        info "ALLOWED_GROUPS is not set, defaults to wildcard"
+        ALLOWED_GROUPS="*"
+    fi
+    if [ -z $DENIED_USERS ]; then
+        info "DENIED_USERS is not set, defaults to nobody"
+        DENIED_USERS="nobody"
+    fi
+    if [ -z $DENIED_GROUPS ]; then
+        info "DENIED_GROUPS is not set, defaults to nobody"
+        DENIED_GROUPS="nobody"
+    fi
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.14_ssh_banner.sh

@@ -0,0 +1,88 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.14 Set SSH Banner (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    OPTIONS="Banner=$BANNER_FILE"
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            PATTERN="^$SSH_PARAM[[:space:]]*"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present and activated"
+                fi
+                /etc/init.d/ssh reload
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    if [ -z $BANNER_FILE ]; then
+        info "BANNER_FILE is not set, defaults to wildcard"
+        BANNER_FILE='/etc/issue.net'
+    fi
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.1_sshd_protocol.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.1 Set SSH Protocol to 2 (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+OPTIONS='Protocol=2'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload > /dev/null 2>&1
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.2_sshd_loglevel.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.2 Set LogLevel to INFO (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+OPTIONS='LogLevel=INFO'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload > /dev/null 2>&1
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.3_sshd_conf_perm_ownership.sh

@@ -0,0 +1,85 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.3 Set Permissions on /etc/ssh/sshd_config (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+FILE='/etc/ssh/sshd_config'
+PERMISSIONS='600'
+USER='root'
+GROUP='root'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    has_file_correct_ownership $FILE $USER $GROUP
+    if [ $FNRET = 0 ]; then
+        ok "$FILE has correct ownership"
+    else
+        crit "$FILE is not $USER:$GROUP ownership set"
+    fi
+    has_file_correct_permissions $FILE $PERMISSIONS
+    if [ $FNRET = 0 ]; then
+        ok "$FILE has correct permissions"
+    else
+        crit "$FILE has not $PERMISSIONS permissions set"
+    fi 
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    does_file_exist $FILE
+    if [ $FNRET != 0 ]; then
+        info "$FILE does not exist"
+        touch $FILE
+    fi
+    has_file_correct_ownership $FILE $USER $GROUP
+    if [ $FNRET = 0 ]; then
+        ok "$FILE has correct ownership"
+    else
+        warn "$FILE is not $USER:$GROUP ownership set"
+        chown $USER:$GROUP $FILE
+    fi
+    has_file_correct_permissions $FILE $PERMISSIONS
+    if [ $FNRET = 0 ]; then
+        ok "$FILE has correct permissions"
+    else
+        info "fixing $FILE permissions to $PERMISSIONS"
+        chmod 0$PERMISSIONS $FILE
+    fi
+}
+
+# This function will check config parameters required
+check_config() {
+    does_user_exist $USER
+    if [ $FNRET != 0 ]; then
+        crit "$USER does not exist"
+        exit 128
+    fi
+    does_group_exist $GROUP
+    if [ $FNRET != 0 ]; then
+        crit "$GROUP does not exist"
+        exit 128
+    fi
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.4_disable_x11_forwarding.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.4 Disable SSH X11 Forwarding (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+OPTIONS='X11Forwarding=no'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload > /dev/null 2>&1
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.5_sshd_maxauthtries.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.5 Set SSH MaxAuthTries to 4 or Less (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+OPTIONS='MaxAuthTries=4'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.6_enable_sshd_ignorerhosts.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.6 Set SSH IgnoreRhosts to Yes (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+OPTIONS='IgnoreRhosts=yes'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.7_disable_sshd_hostbasedauthentication.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.7 Set SSH HostbasedAuthentication to No (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+OPTIONS='HostbasedAuthentication=no'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.8_disable_root_login.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.8 Disable SSH Root Login (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+OPTIONS='PermitRootLogin=no'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

bin/hardening/9.3.9_disable_sshd_permitemptypasswords.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+
+#
+# CIS Debian 7 Hardening
+# Authors : Thibault Dewailly, OVH <thibault.dewailly@corp.ovh.com>
+#
+
+#
+# 9.3.9 Set SSH PermitEmptyPasswords to No (Scored)
+#
+
+set -e # One error, it's over
+set -u # One variable unset, it's over
+
+PACKAGE='openssh-server'
+OPTIONS='PermitRootLogin=no'
+FILE='/etc/ssh/sshd_config'
+
+# This function will be called if the script status is on enabled / audit mode
+audit () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET != 0 ]; then
+        crit "$PACKAGE is not installed !"
+    else
+        ok "$PACKAGE is installed"
+        for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                crit "$PATTERN is not present in $FILE"
+            fi
+        done
+    fi
+}
+
+# This function will be called if the script status is on enabled mode
+apply () {
+    is_pkg_installed $PACKAGE
+    if [ $FNRET = 0 ]; then
+        ok "$PACKAGE is installed"
+    else
+        crit "$PACKAGE is absent, installing it"
+        apt_install $PACKAGE
+    fi
+    for SSH_OPTION in $OPTIONS; do
+            SSH_PARAM=$(echo $SSH_OPTION | cut -d= -f 1)
+            SSH_VALUE=$(echo $SSH_OPTION | cut -d= -f 2)
+            PATTERN="^$SSH_PARAM[[:space:]]*$SSH_VALUE"
+            does_pattern_exists_in_file $FILE "$PATTERN"
+            if [ $FNRET = 0 ]; then
+                ok "$PATTERN is present in $FILE"
+            else
+                warn "$PATTERN not present in $FILE, adding it"
+                does_pattern_exists_in_file $FILE "^$SSH_PARAM"
+                if [ $FNRET != 0 ]; then
+                    add_end_of_file $FILE "$SSH_PARAM $SSH_VALUE"
+                else
+                    info "Parameter $SSH_PARAM is present but with the wrong value, correcting"
+                    replace_in_file $FILE "^$SSH_PARAM[[:space:]]*.*" "$SSH_PARAM $SSH_VALUE"
+                fi
+                /etc/init.d/ssh reload
+            fi
+    done
+}
+
+# This function will check config parameters required
+check_config() {
+    :
+}
+
+# Source Root Dir Parameter
+if [ ! -r /etc/default/cis-hardenning ]; then
+    echo "There is no /etc/default/cis-hardenning file, cannot source CIS_ROOT_DIR variable, aborting"
+    exit 128
+else
+    . /etc/default/cis-hardenning
+    if [ -z $CIS_ROOT_DIR ]; then
+        echo "No CIS_ROOT_DIR variable, aborting"
+    fi
+fi 
+
+# Main function, will call the proper functions given the configuration (audit, enabled, disabled)
+[ -r $CIS_ROOT_DIR/lib/main.sh ] && . $CIS_ROOT_DIR/lib/main.sh

etc/conf.d/9.2.1_enable_cracklib.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.2.2_enable_lockout_failed_password.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.2.3_limit_password_reuse.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.3.10_disable_sshd_setenv.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.3.11_sshd_ciphers.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.3.12_sshd_idle_timeout.cfg

@@ -0,0 +1,5 @@
+# Configuration for script of same name
+status=enabled
+# In seconds, value of ClientAliveInterval, ClientAliveCountMax bedoing set to 0
+# Settles sshd idle timeout
+SSHD_TIMEOUT=900 

etc/conf.d/9.3.13_sshd_limit_access.cfg

@@ -0,0 +1,9 @@
+# Configuration for script of same name
+status=enabled
+
+# Put here ssh user hardening list, there is a default in script to not break your configuration
+# However, it can erase current configuration
+ALLOWED_USERS=''
+ALLOWED_GROUPS=''
+DENIED_USERS=''
+DENIED_GROUPS=''

etc/conf.d/9.3.14_ssh_banner.cfg

@@ -0,0 +1,4 @@
+# Configuration for script of same name
+status=enabled
+# Put here banner file, default to /etc/issue.net
+BANNER_FILE=""

etc/conf.d/9.3.1_sshd_protocol.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.3.2_sshd_loglevel.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.3.3_sshd_conf_perm_ownership.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.3.4_disable_x11_forwarding.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.3.5_sshd_maxauthtries.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.3.6_enable_sshd_ignorerhosts.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.3.7_disable_sshd_hostbasedauthentication.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.3.8_disable_root_login.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

etc/conf.d/9.3.9_disable_sshd_permitemptypasswords.cfg

@@ -0,0 +1,2 @@
+# Configuration for script of same name
+status=enabled

lib/utils.sh

@@ -114,8 +114,8 @@ add_end_of_file() {
     local LINE=$2
 
     debug "Adding $LINE at the end of $FILE"
-    backup_file "$1"
-    echo "$2" >> $FILE
+    backup_file "$FILE"
+    echo "$LINE" >> $FILE
 }
     
 add_line_file_before_pattern() {